BA120PC | 120pc Solder Seal Electrical Heat Shrink Butt Connectors

General Features:

• The shrinkage ratio is 2:1
• No need to crimp wire together
• Use a heat gun to evenly shrink the connectors together
• Self-solder heat shrink butt connector
• 1-Year Manufacturers Warranty

What's Included

• 30 x White Connectors: Diameter 1.7 mm, able cross-section 0.25-0.34 mm² (A.W.G.:26-24)
• 40 x Red Connectors: Diameter 2.7 mm, Cable cross-section 0.5-1.0 mm² (A.W.G.:22-18)
• 40 x Blue Connectors: Diameter 4.5 mm, Cable cross-section 1.5-2.5 mm²(A.W.G.:16-14)
• 4.10 x Yellow Connectors: Diameter 6.0 mm, Cable cross-section 4.0-6.0 mm²(A.W.G.:12-10)

How-To Steps

1. Strip wire insulation with 1/3" on both wire ends. Twist the strands together
2. Heat the shrink tubing first to fix wires, then apply heat while continuously rotating wire to make the connector evenly heated
3. The solder will melt and flow through the stripped wires. Allow the connector to cool down before use.